Description
The GeoFlow Lockslip Elbow (LTEL-600) is a directional PVC fitting designed specifically for GeoFlow’s Wasteflow pressure-compensating dripline, used in subsurface drip irrigation and septic/effluent dispersal field installations. It’s part of GeoFlow’s 600-series Lockslip fitting family, which connects dripline sections with a hand-tightened compression joint instead of solvent welding or barbed push-fit connections.
The Lockslip system works with a threaded sleeve over a barbed stem: slide the sleeve back, push the dripline onto the barbed stem, then hand-thread the sleeve forward until snug — no primer, glue, or tools required. Each connection should be tug-tested after installation to confirm a secure seal, per GeoFlow’s standard installation guidance.
Use the LTEL-600 wherever a drip lateral needs to change direction — at the edge of a drip field, around obstructions, or at manifold connections — without cutting into the tubing wall or introducing a rigid, glued joint into a field designed for flexible layout.
Specifications:
- Fitting type: Elbow (directional change fitting), Lockslip 600-series
- Compatible tubing: GeoFlow Wasteflow 16mm dripline (nominal 1/2″ OD, ~0.64″ OD / ~0.55″ ID)
- Material: PVC
- Connection method: Tool-free compression (threaded sleeve over barbed stem), hand-tighten only
- Typical application: Subsurface drip irrigation and septic/effluent dispersal field laterals
