Geoflow Pressure Compensating Wasteflow blank tubing 16mm / 0.5” 100′ Roll (WFPLAIN)


Geoflow Drip Tubing Wasteflow BLANK Line (No Emitters) – Per Foot Price – 100′ Minimum Order

SKU: 15412 Categories: ,


Geoflow Pressure Compensating Wasteflow blank tubing 16mm / 0.5” 100′ Roll (WFPLAIN)

*does not qualify for free shipping due to dimensions.

The flexible 1/2” polyethylene blank line has no emitters and us
normally used to bridge areas where emitters are not needed or wanted in
the system design. This Geoflow drip tubing is built to last. It is guaranteed to be
trouble-free from root intrusion with built-in nano-ROOTGUARD®
protection, and the dripline wall is protected from organic growth with the
Geoshield lining. Use 600 series compression adapters or lockslip fittings
to connect the dripline to PVC pipe.

BACTERICIDE ProtectionGeoshield® is incorporated into the inner
and emitters of WASTEFLOW dripline to prevent bacteria from forming
eliminates the need to scour the tubing. It is a tin based formula
defeats the energy system of microbial cells. This means smaller
pumps or larger zones can be used with Geoflow drip line than
unprotected drip line.

Geoflow Wasteflow PC Drip Tubing Specifications

The dripline shall consist of nominal sized one-half inch linear low
density polyethylene tubing, with turbulent flow drip emitters bonded to
the inside wall. The drip emitter flow passage shall be 0.032” x
0.045” square. The tubing shall have an outside diameter (O.D.) of
approximately .64-inches and an inside diameter (I.D.) of approximately
.55-inches. The tubing shall consist of three layers; the inside layer
shall be a Geoshield® protection, the middle layer shall be black and
the outside layer shall be purple striped for easy identification. The
dripline shall have emitters regularly spaced 24” (or 18” or
12”) apart. The pressure compensating emitters shall be molded from
virgin polyethylene resin with a silicone rubber diaphragm. The pressure
compensating emitters shall have nominal discharge rates of 0.53 gallons
per hour. The emitters shall be impregnated with Treflan® to inhibit
root intrusion for a minimum period of fifteen years and shall be
guaranteed by the manufacturer to inhibit root intrusion for this period.
0.53 gph WASTEFLOW PC pressure compensating dripline shall be Geoflow model
number WFPC16-2-24 (or WFPC16-2-18 or WFPC16-2-12)