SJE Rhombus AmpMaster

$142.99

SKU: 1091 Categories: , , ,

Description

Mechanically-Activated, Wide-Angle Pump Switch 10′ Cord

pump master float switch

The 20 amp rated SJE AmpMaster® pump switch (10′ Cord) Part No. 1006310) is designed to directly control grinder and high head sewage pumps up to 1 1/2 HP at 125 VAC and 3 HP at 250 VAC in grinder and lift station applications, as well as septic tank effluent pump (STEP) systems.

The SJE AmpMaster® pump switch is not sensitive to rotation or turbulence, allowing it to be used in both calm and turbulent applications. It is available for pump down applications only.

Features

  • Maximum pump running current of 20 amps
  • Heavy-duty contacts mounted on high-conductivity copper substrates
  • Controls pumps up to 1 1/2 HP at 125 VAC and 3 HP at 250 VAC
  • Second set of non-conductive contacts enhance switch activation
  • For direct wiring in 125 VAC or 250 VAC applications (piggy-back plug model not available)
  • Adjustable pumping range of 9 – 24 inches (23 -61 cm)
  • Includes standard mounting clamp and boxed packaging
  • SJE AmpMaster® Pump Switch Diagrams

ampmaster diagram

Options:
  • In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) – longer lengths available
UL Recognized, CSA Certified
Five-Year Limited Warranty

Specifications

CABLE:
  • Flexible 12 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT:
  • 3.05 inches diameter x 3.56 inches long (7.75 x 9.04 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 120°F (50°C)
ELECTRICAL:
  • 125 VAC 50/60 Hz Single Phase:
    • Maximum Pump Running Current: 20 amps
    • Maximum Pump Starting Current: 120 amps
    • Recommended Pump HP: 1 1/2 HP or less
  • 250 VAC 50/60 Hz Single Phase:
    • Maximum Pump Running Current: 20 amps
    • Maximum Pump Starting Current: 120 amps
    • Recommended Pump HP: 3 HP or less

NOTE: This switch must be used with pumps that provide integral thermal overload protection. Certain pump applications may require the use of an external capacitor start kit.

A Pump Switch is designed for Horsepower (HP) rated loads and is not suitable for control (pilot duty) applications. It will fail prematurely when switching loads less than 1 Amp at 120 VAC. Select a float switch from our Control Switch offering for control applications.

You may also like…