Geoflow drip line consists of nominal sized one-half inch linear low density polyethylene tubing, with turbulent flow drip emitters bonded to the inside wall. The drip emitter flow passage shall be 0.032” x 0.045” square. The tubing shall have an outside diameter (O.D.) of approximately .64-inches and an inside diameter (I.D.) of approximately .55-inches. The tubing shall consist of three layers; the inside layer shall be a Geoshield® protection, the middle layer shall be black and the outside layer shall be purple striped for easy identification. The drip line shall have emitters regularly spaced 24” (or 18” or 12”) apart. The pressure compensating emitters shall be molded from virgin polyethylene resin with a silicone rubber diaphragm. The pressure compensating emitters shall have nominal discharge rates of 0.53 gallons per hour. The emitters shall be impregnated with Treflan® to inhibit root intrusion for a minimum period of fifteen years and shall be guaranteed by the manufacturer to inhibit root intrusion for this period.
This Product is sold only by the Roll (500 ft)
Why Choose WaterflowPRO?
16mm diameter tubing with PC or Classic emitter
Patented nano-Rootguard® band PROtects against root intrusion
Patented Geoshield® antimicrobial lining prevents biofilm build-up inside tubing Constant performance in all climates
Optimal for use on severe slopes and long runs
Provides maximum water distribution uniformity in tough topographical areas High quality resins assure durable performance and long life
Warranty against defects in materials or workmanship
Emitter spacing available in 12″ or 24″